GSM - Mobile Phone - Definition
The Global System for Mobile Communications (GSM) is the most popular standard for mobile phones in the world. GSM service is used by over 1.5 billion people across more than 210 countries and territories . The ubiquity of the GSM standard makes international roaming very common between mobile phone operators, enabling subscribers to use their phones in many parts of the world. GSM differs significantly from its predecessors in that both signaling and speech channels are digital, which means that it is considered a second generation (2G) mobile phone system. This fact has also meant that data communication was built into the system from very early on. GSM is an open standard which is currently developed by the 3GPP.
From the point of view of the consumer, the key advantage of GSM systems has been higher digital voice quality and low cost alternatives to making calls such as text messaging. The advantage for network operators has been the ability to deploy equipment from different vendors because the open standard allows easy inter-operability. Also, the standards have allowed network operators to offer roaming services which mean subscribers can use their phone all over the world.
GSM retained backward-compatibility with the original GSM phones as the GSM standard continued to develop, for example packet data capabilities were added in the Release '97 version of the standard, by means of GPRS. Higher speed data transmission has also been introduced with EDGE in the Release '99 version of the standard.
Throughout the evolution of cellular telecommunications, various systems were developed without the benefit of standardized specifications. This presented many problems directly related to compatibility, especially with the development of digital radio technology. In 1982, The GSM group ("Groupe Spécial Mobile" (French) 1, 2, 3 and 4) was formed to address these problems. The name of the system comes from the name of this group, though later the decision was made to keep the initials but to change what they stood for. Originally the group was hosted by CEPT.
From 1982 to 1985 discussions were held to decide between building an analog or digital system. After multiple field tests, a digital system was adopted for GSM. The next task was to decide between a narrow or broadband solution. In May 1987, the narrowband time division multiple access (TDMA) solution was chosen.
The technical fundamentals of the GSM system were defined in 1987. In 1989, ETSI took over control and by 1990 the first GSM specification was completed, amounting to over 6,000 pages of text. Commercial operation began in 1991 with Radiolinja in Finland.
In 1998, the 3rd Generation Partnership Project (3GPP) was formed. Originally it was intended only to produce the specifications of the next (third, 3G) generation of mobile networks. However, 3GPP also took over the maintenance and development of the GSM specification. ETSI is a partner in 3GPP.
GSM provides recommendations, not requirements. The GSM specifications define the functions and interface requirements in detail but do not address the hardware. The reason for this is to not limit the designers yet still make it possible for the operators to buy equipment from different suppliers.
GSM is a cellular network, which means that mobile phones connect to it by searching for cells in the immediate vicinity. GSM networks operate at various different radio frequencies. Most GSM networks operate in the 900 MHz or 1800 MHz bands. Some networks in parts of the Americas (including the USA and Canada) that operate in the 850 MHz or 1900 MHz bands because the 900 and 1800MHz frequency bands were already allocated. An even smaller number of areas use the 400 and 450MHz frequency bands. Because of this proliferation of bands, there is no single phone sold that can work at full capabilities on all GSM systems in the world.
In the 900 MHz band the uplink frequency band is 890-915 MHz, and the downlink frequency band is 935-960 MHz. This 25 MHz bandwidth is subdivided into 124 carrier frequency channels, each spaced 200 kHz apart. Time division multiplexing is used to allow eight speech channels per Radio frequency channel. There are eight burst periods grouped into what is called a TDMA frame. The channel data rate is 270.833 kb/s, and the frame duration is 4.615 ms.
The transmission power in the handset is limited to a maximum of 2 watts in GSM850/900 and 1 watt in GSM1800/1900.
GSM uses linear predictive coding (LPC). The purpose of LPC is to reduce the bit rate. The LPC provides parameters for a filter that mimics the vocal tract. The signal passes through this filter, leaving behind a residual signal. Speech is encoded at 13 kbps.
There are four different cell sizes in a GSM network - macro, micro, pico and umbrella cells. The coverage area of each cell varies according to the implementation environment. Macro cells can be regarded as cells where the base station antenna is installed on a mast or a building above average roof top level. Micro cells are cells whose antenna height is under average roof top level; they are typically used in urban areas. Picocells are small cells whose diameter is a few dozen meters; they are mainly used indoors. On the other hand, umbrella cells are used to cover shadowed regions of smaller cells and fill in gaps in coverage between those cells.
Cell radius varies depending on antenna height, antenna gain and propagation conditions from a couple of hundred meters to several tens of kilometers. The longest distance the GSM specification supports in practical use is 35 km or 22 miles. There are also several implementations of the concept of an extended cell, where the cell radius could be double or even more, depending on the antenna system, the type of terrain and the timing advance.
Indoor coverage is also supported by GSM and may be achieved by using an indoor picocell base station, or an indoor repeater with distributed indoor antennas fed through power splitters, to deliver the radio signals from an antenna outdoors to the separate indoor distributed antenna system. These are typically deployed when a lot of call capacity is needed indoors, for example in shopping centers or airports. However, this is not a pre-requisite, since indoor coverage is also provided by in-building penetration of the radio signals from nearby cells.
The modulation used in GSM is Gaussian minimum shift keying (GMSK), a kind of continuous-phase frequency shift keying. In GMSK, the signal to be modulated onto the carrier is first smoothened with a Gaussian low-pass filter prior to being fed to a frequency modulator, which greatly reduces the interference to neighboring channels (adjacent channel interference).
From the point of view of the consumer, the key advantage of GSM systems has been higher digital voice quality and low cost alternatives to making calls such as text messaging. The advantage for network operators has been the ability to deploy equipment from different vendors because the open standard allows easy inter-operability. Also, the standards have allowed network operators to offer roaming services which mean subscribers can use their phone all over the world.
GSM retained backward-compatibility with the original GSM phones as the GSM standard continued to develop, for example packet data capabilities were added in the Release '97 version of the standard, by means of GPRS. Higher speed data transmission has also been introduced with EDGE in the Release '99 version of the standard.
Throughout the evolution of cellular telecommunications, various systems were developed without the benefit of standardized specifications. This presented many problems directly related to compatibility, especially with the development of digital radio technology. In 1982, The GSM group ("Groupe Spécial Mobile" (French) 1, 2, 3 and 4) was formed to address these problems. The name of the system comes from the name of this group, though later the decision was made to keep the initials but to change what they stood for. Originally the group was hosted by CEPT.
From 1982 to 1985 discussions were held to decide between building an analog or digital system. After multiple field tests, a digital system was adopted for GSM. The next task was to decide between a narrow or broadband solution. In May 1987, the narrowband time division multiple access (TDMA) solution was chosen.
The technical fundamentals of the GSM system were defined in 1987. In 1989, ETSI took over control and by 1990 the first GSM specification was completed, amounting to over 6,000 pages of text. Commercial operation began in 1991 with Radiolinja in Finland.
In 1998, the 3rd Generation Partnership Project (3GPP) was formed. Originally it was intended only to produce the specifications of the next (third, 3G) generation of mobile networks. However, 3GPP also took over the maintenance and development of the GSM specification. ETSI is a partner in 3GPP.
GSM provides recommendations, not requirements. The GSM specifications define the functions and interface requirements in detail but do not address the hardware. The reason for this is to not limit the designers yet still make it possible for the operators to buy equipment from different suppliers.
GSM is a cellular network, which means that mobile phones connect to it by searching for cells in the immediate vicinity. GSM networks operate at various different radio frequencies. Most GSM networks operate in the 900 MHz or 1800 MHz bands. Some networks in parts of the Americas (including the USA and Canada) that operate in the 850 MHz or 1900 MHz bands because the 900 and 1800MHz frequency bands were already allocated. An even smaller number of areas use the 400 and 450MHz frequency bands. Because of this proliferation of bands, there is no single phone sold that can work at full capabilities on all GSM systems in the world.
In the 900 MHz band the uplink frequency band is 890-915 MHz, and the downlink frequency band is 935-960 MHz. This 25 MHz bandwidth is subdivided into 124 carrier frequency channels, each spaced 200 kHz apart. Time division multiplexing is used to allow eight speech channels per Radio frequency channel. There are eight burst periods grouped into what is called a TDMA frame. The channel data rate is 270.833 kb/s, and the frame duration is 4.615 ms.
The transmission power in the handset is limited to a maximum of 2 watts in GSM850/900 and 1 watt in GSM1800/1900.
GSM uses linear predictive coding (LPC). The purpose of LPC is to reduce the bit rate. The LPC provides parameters for a filter that mimics the vocal tract. The signal passes through this filter, leaving behind a residual signal. Speech is encoded at 13 kbps.
There are four different cell sizes in a GSM network - macro, micro, pico and umbrella cells. The coverage area of each cell varies according to the implementation environment. Macro cells can be regarded as cells where the base station antenna is installed on a mast or a building above average roof top level. Micro cells are cells whose antenna height is under average roof top level; they are typically used in urban areas. Picocells are small cells whose diameter is a few dozen meters; they are mainly used indoors. On the other hand, umbrella cells are used to cover shadowed regions of smaller cells and fill in gaps in coverage between those cells.
Cell radius varies depending on antenna height, antenna gain and propagation conditions from a couple of hundred meters to several tens of kilometers. The longest distance the GSM specification supports in practical use is 35 km or 22 miles. There are also several implementations of the concept of an extended cell, where the cell radius could be double or even more, depending on the antenna system, the type of terrain and the timing advance.
Indoor coverage is also supported by GSM and may be achieved by using an indoor picocell base station, or an indoor repeater with distributed indoor antennas fed through power splitters, to deliver the radio signals from an antenna outdoors to the separate indoor distributed antenna system. These are typically deployed when a lot of call capacity is needed indoors, for example in shopping centers or airports. However, this is not a pre-requisite, since indoor coverage is also provided by in-building penetration of the radio signals from nearby cells.
The modulation used in GSM is Gaussian minimum shift keying (GMSK), a kind of continuous-phase frequency shift keying. In GMSK, the signal to be modulated onto the carrier is first smoothened with a Gaussian low-pass filter prior to being fed to a frequency modulator, which greatly reduces the interference to neighboring channels (adjacent channel interference).
posted by Fox @ 7:41 AM
0 comments
